Pressure Washing
Clean Concrete. Clean Property. Clean First Impression.
★★★★★ 5-Star Rated · Twin Cities Homeowners
Same-week scheduling available. North Peak blasts away years of embedded dirt, oil stains, algae, and grime from driveways, patios, sidewalks, and commercial surfaces - restoring them to like-new condition.
- Licensed & Insured
- Same-Week Scheduling Available
- Residential & Commercial
- Satisfaction Guaranteed
Why It Matters
Hard Surfaces Need More Than a Rinse
Concrete, brick, and paver surfaces are porous - which means dirt, oil, algae, and mildew don't just sit on top, they work their way in. A garden hose won't touch it. Over time, the buildup makes surfaces look neglected, feel slippery underfoot, and breaks down the material itself.
Professional pressure washing uses the right PSI for each surface type to blast embedded grime out of the pores - not just off the top. The difference is immediate and dramatic. Surfaces that looked permanently stained come back looking clean, bright, and years younger.
Whether it's a driveway caked with oil and winter salt, a patio covered in green algae, or a commercial entryway that's seen too much foot traffic, North Peak has the equipment and experience to get it done right.
Driveways & Garage Aprons
Oil stains, tire marks, winter salt residue, and embedded dirt - we remove it all from concrete and asphalt driveways, including the apron where it meets the street.
Steps & Retaining Walls
Entry steps, stoops, and retaining walls cleaned to match the rest of your property. No awkward transitions between clean and dirty surfaces.
Sidewalks & Walkways
Front walks, side paths, and public-facing sidewalks cleaned to a uniform, slip-resistant finish. Great for curb appeal and safety.
Commercial Lots & Entryways
Parking lots, drive lanes, loading areas, dumpster pads, and entryways for businesses and commercial properties. Recurring plans available.
Patios & Outdoor Living Areas
Concrete, pavers, brick, and stone patios accumulate algae and grime fast - especially in shaded areas. We restore them before entertaining season.
Right PSI for Every Surface
We adjust pressure based on material - concrete gets treated differently than pavers or brick. No damage, no cracking, just clean.
Pressure Washing for Homes & Businesses
Pressure washing For
Homeowners
Your driveway and patio take more abuse than almost any other part of your property - oil drips, winter road salt, algae growth, and years of foot and vehicle traffic all leave their mark.
A professional pressure wash makes an immediate, visible difference and extends the life of your concrete and paver surfaces.
What's included:
- Driveway and garage apron
- Sidewalks and front walkways
- Patio and deck surfaces
- Entry steps and stoops
- Retaining walls
Recommended frequency: Every 1-2 years for most homes. Driveways near busy roads or with oil stains may benefit from annual cleaning.
Pressure Washing For
Commercial
High-traffic commercial surfaces show wear fast. Dirty parking lots, grimy entryways, and stained sidewalks signal neglect to customers before they ever walk through your door. North Peak keeps your exterior surfaces clean, safe, and presentable - with flexible scheduling that works around your business hours.
What's included:
- Parking lots and drive lanes
- Sidewalks and pedestrian walkways
- Building entryways and approaches
- Dumpster pads and service areas
- Loading docks and back-of-house areas
Why it matters: Clean exterior surfaces reduce slip-and-fall liability, meet HOA and municipal cleanliness standards, and signal to customers that your business is well-managed. Recurring service plans available.
Common Questions About Pressure Washing
What surfaces can you pressure wash?
We pressure wash concrete driveways, asphalt, brick, pavers, natural stone, entry steps, retaining walls, patios, sidewalks, and commercial hard surfaces. We do not pressure wash home siding - for that, we use our low-pressure soft wash service to avoid damage.
Can pressure washing remove oil stains from my driveway?
Yes, in most cases. Fresh oil stains respond well to pressure washing. Older, deeply set stains may lighten significantly but may not come out 100% depending on how long they've been there. We can give you an honest assessment when we quote the job.
Will pressure washing damage my concrete or pavers?
Not when done correctly. We use the appropriate PSI and nozzle type for each surface material. High pressure on the wrong surface can cause etching or cracking - which is why experience and the right equipment matter. We adjust our approach for every job.
Do I need to be home?
Not for exterior hard surfaces. As long as we have access to the area and an outdoor water spigot, we can complete the job without anyone home. We'll confirm details when we schedule.
How long does pressure washing take?
A standard residential driveway and walkway takes 1-2 hours. Larger jobs - full patios, commercial lots, or multiple surface areas - may take longer. We'll give you an estimate when we quote.
How often should I have my driveway or patio pressure washed?
Every 1-2 years is typical for most Twin Cities homes. Driveways with oil stains, shaded patios that stay damp, or commercial properties with heavy foot traffic may benefit from annual cleaning.
Do you offer recurring service for commercial properties?
Yes. We can set up a regular schedule - monthly, quarterly, or seasonally - to keep your property consistently clean. Reach out to discuss a plan that fits your needs and budget.